Complete Etap course for Power Electrical Engineering

The easiest way to become a Pro Designer in Electrical Power Systems using Etap from scratch!

Hi Our Friend!

What you’ll learn

  • Design and simulate power systems.
  • Simulate AC Power systems.
  • Conduct studies for Load dispatching.
  • Simulate Industrial Power networks.
  • Build power systems and simulate the power, current and voltage flow.
  • Run Short Circuit analysis and Arc-Flash.
  • Run load flow analysis on one line diagram.
  • Single Line diagram creation and analysis.
  • Run and Analyze AC power circuits.
  • Protection Coordination Analysis.
  • Motor Starting Analysis Examples.
  • Short Circuit Analysis Example.
  • Load Flow Analysis.
  • Fundamentals of Power System Analysis.

Course Content

  • Course Content –> 2 lectures • 5min.
  • Etap overview –> 2 lectures • 35min.
  • Load flow analysis –> 4 lectures • 38min.
  • ARC Flash Analysis –> 3 lectures • 30min.
  • Short circuit analysis –> 2 lectures • 15min.
  • Transient Stability –> 3 lectures • 52min.
  • Motor Starting Analysis –> 6 lectures • 1hr 13min.
  • Grounding System –> 2 lectures • 24min.
  • Harmonics Analysis –> 3 lectures • 36min.
  • Protection Analysis –> 1 lecture • 40min.

Complete Etap course for Power Electrical Engineering

Requirements

  • Fundamentals of Electrical Engineering.
  • No Any Special Skills and Knowledge Requirement.
  • Passion To Learn Power System Analysis.

Hi Our Friend!

– Looking to enhance your career in Electrical Power Distribution track ?

** If your answer is a big YES You’re definitely in the right place.

 

 

Why this course is Powerful and Unique ?

  1. This course will give a person with no prior experience the basic tools necessary to create a Complete single line diagram from scratch.
  2. ETAP is an analytical engineering software which is helpful for an electrical engineer to simulate and analyze the steady state and dynamic power system. It is used by various sectors such as Generation, Transmission, Distribution, Industrial, Transportation and Low voltage.
  3. The course will begin with the software overview, basics of one-line diagram creation, data entry, and quickly expands the users’ knowledge to include methods to automatically perform multiple ‘what if’ studies using multiple scenarios.
  4. Load Flow Analysis With Supporting Hand Calculations
  5. add PV array with wind generator and see the PQ flow through the system
  6. understand the interconnected power system.
  7. Be able to design a complete Earthing grid and test it.
  8. Transformer MVA Sizing
  9. Short Circuit Analysis With Supporting Hand Calculations
  10. Protection & Coordination Analysis
  11. Arc Flash Analysis Using IEEE:1584-2002 Standard
  12. Motor Starting Analysis 

     

     

    At this course :

    – These tracks would be like a piece of cake to you.

    – We’ll take you from the Scratch to a HIGHER level of Designing .

    – We’ll design with each other a complete electrical distribution system.

 

O help is always available to you if you get stuck or have a question as I believe we can learn from each other

This is a course that will continue to grow and grow ..

## So don’t hesitate and click “ Buy Now ” button so you can begin on the right path!

 

Who is the target audience?

  • Anyone who is interested in Understanding VSD.
  • Electrical Engineering Students.
  • Anyone who wants to be familiar with Industrial Automation and Industrial Machines.
  • Anyone understands VSD but can’t practice on Actual VFD.