Learn CNC lathe programming using Mastercam 2021 ( Facing+OD Turning+ID Turning+Groving+G&M code & Setup sheet output
Mastercam is a CAD/CAM software , Which is mostly used for designing and cnc machine’s programming purpose . Mastercam generate’s G code and M code . This software helps users produce mechanical drawings and 3d models , Mastercam also used for multi type of cnc machines programming.
What you’ll learn
- Mastercam 2021 interface overview.
- Basic commands overview.
- Learn lathe ( turning ) Programming.
Course Content
- Basic interface overview –> 1 lecture • 24min.
- Lathe Programming session – 1 _ Origin setup and stock setup –> 1 lecture • 8min.
- Lathe Programming session – 2 _ Facing toolpath using general cycle and canned c –> 1 lecture • 14min.
- OD turning using general cycle and canned cycle and Dynamic turning –> 1 lecture • 20min.
- OD finishing using general cycle and canned cycle –> 1 lecture • 15min.
- OD Groving using general cycle and canned cycle –> 1 lecture • 16min.
- Lathe Programming session – 6 –> 1 lecture • 20min.
- G&M Code output and Setup sheet output –> 1 lecture • 8min.
Requirements
- Basic knowledge of computer.
- Basic knowledge of CNC.
Mastercam is a CAD/CAM software , Which is mostly used for designing and cnc machine’s programming purpose . Mastercam generate’s G code and M code . This software helps users produce mechanical drawings and 3d models , Mastercam also used for multi type of cnc machines programming.
Mastercam is the worlds no.1 software , Mastercam was launched in 1983 in U.S. Connecticut by CNC software inc .
Mastercam 2021 version ( Latest ).
Any Mastercam version user can take this course.
Why this course to learn Mastercam ?
1. All the tutorial prepared by Mastercam Professional Instructor.
2. All the session based on practical project.
3. High-skill level guide.
5. Genuine course to be a CAD/CAM engineer
