Ansible For Network Engineers – Cisco

Learn Ansible basics, and run playbooks in Cisco, Juniper, Huawei and more

Why we need for Network Automation?

What you’ll learn

  • Introduction to Ansible Automation.
  • Automate Cisco Devices with Ansible.
  • Learn with Hands-on Examples.
  • Learn Ansible with +10 Projects.

Course Content

  • Ansible Introduction –> 6 lectures • 7min.
  • YAML Language Introduction –> 2 lectures • 7min.
  • Ansible Architecture and Features –> 5 lectures • 9min.
  • Ansible Installation –> 7 lectures • 16min.
  • Ansible Ad-hoc Commands –> 6 lectures • 22min.
  • Ansible Playbooks –> 8 lectures • 19min.
  • Ansible – Networking Projects –> 15 lectures • 1hr 37min.
  • Bonus Section –> 3 lectures • 1min.

Auto Draft


  • Basic Knowledge of Networking Concepts.
  • Basic Knowledge of Linux Systems.
  • No Coding Required !!!.

Why we need for Network Automation?

As a network/system engineer, future will be different. Not just login devices with SSH tools. We must automate the network with scripts.

Ansible is simple, easy to learn and very powerful tool to automate networks. With Ansible you can do very fast operations and collecting logs.


In this course, you will start from beginning. Than as below playbooks (aka scripts), you will learn how to collect logs from device and configure devices. All playbooks are work related and prepare for REAL LIFE networking.


What will you do after course?

There are 9 of hands-on projects about Cisco Automation. You can directly use all of codes in your real network.

– Collect logs with Raw Module

– Run Show Commands

– Save Logs to Files

– Configuration with Loop

– Send Config Commands

– Backup Configuration

– Run Commands from File

– Save Configuration


Additionally you can find:

– 8 Juniper Playbooks

– 5 Huawei Playbooks


Why Is Ansible?

Ansible is a powerful network automation tool. Without any coding experience, you can automate your network easily with just couple of lines of playbooks.

For example you can collect 10 devices CPU levels in couple of minutes. But what about 100, 1K+ devices. It’s almost imposible to do it one-by-one. Ansible shows its power here. With a very basics script, you can collect hunderds of devices logs, or configure them.

Get Tutorial