BGP and OSPF on FortiGate (NSE7) and High level LABs

BGP and OSPF on FortiGate

In this course we will learn to understand BGP and OSPF routing protocol and how to deploy BGP and OSPF in FortiGate devices and build real labs based on real environments in companies, Most useful in this course to build HQ and DR FortiGate LABs with branches and clarification how traffic Crossing through HQ and DR, solve the exercise when separating link branches with HQ and DR, and most importantly build a stable connection network in the routing table and check all predictable indicators of what is happening in the links between HQ and DR, the routing protocol No less important than protection procedures Make sure using network encrypted, use BPG and OSPF over IPsec VPN to ensure all traffic encrypted between branches to prevent sniffing attack.

What you’ll learn

  • You will understand BGP and OSPF routing protocol in a simple way..
  • How to Configure BGP and OSPF in Fortigate based on GUI or CLI interface..
  • Explore how to install BGP and OSPF in large environments together, arrange the routing table, and distinguish between a routing table and a routing database..
  • It is recommended to those who work in large companies with multiple branches and bank networks..

Course Content

  • BGP Introduction –> 4 lectures • 31min.
  • Prepare GNS3 emulation –> 2 lectures • 8min.
  • Simple LAB BGP Advertised and receive route –> 1 lecture • 17min.
  • Route Reflector –> 2 lectures • 23min.
  • Additional Path & BGP ECMP –> 3 lectures • 34min.
  • BGP Attribute & Status Code and Redistribution –> 2 lectures • 30min.
  • Prefix-List, Access-List and Route-Map –> 3 lectures • 32min.
  • BGP Peer-Group & BGP Authentication –> 1 lecture • 14min.
  • BGP Timer & Reset BGP session –> 1 lecture • 21min.
  • LAB for all previous subjects –> 1 lecture • 1hr 1min.
  • BGP over IPsec (Overlay) –> 2 lectures • 1hr 47min.
  • BGP Troublshoot –> 1 lecture • 9min.

Auto Draft

Requirements

In this course we will learn to understand BGP and OSPF routing protocol and how to deploy BGP and OSPF in FortiGate devices and build real labs based on real environments in companies, Most useful in this course to build HQ and DR FortiGate LABs with branches and clarification how traffic Crossing through HQ and DR, solve the exercise when separating link branches with HQ and DR, and most importantly build a stable connection network in the routing table and check all predictable indicators of what is happening in the links between HQ and DR, the routing protocol No less important than protection procedures Make sure using network encrypted, use BPG and OSPF over IPsec VPN to ensure all traffic encrypted between branches to prevent sniffing attack.

-The BGP course will learn BGP route selection, status and show traffic using Wireshark because the Wireshark program this important to know what is the problem when BGP status still down.

-Using GNS3 will install FortiGate VM.

-explaining route reflector and what is the important to using that feature to share network and advertise networks to all branches to create network full mesh

-Additional Path feature integrate with Route Reflector and uses Access-List and Route-Map

-Peer Group that feature the simplification when have many of peers and difficult to add peer separately in the HQ and DR

Get Tutorial