FPGA Embedded Design, Part 3 – EDA Tools

Learn FPGA embedded application design with four different tools.

It’s time to learn more about FPGA IDEs!

What you’ll learn

  • Apply your Verilog knowledge to real applications with FPGAs..
  • Vivado Studio, by Xilinx.
  • Quartus Prime, by Intel.
  • EDA Playground, by Doulos.
  • LabsLand, a remote lab platform.

Course Content

  • Introduction –> 4 lectures • 8min.
  • Electronic Design Automation Tools –> 8 lectures • 12min.
  • EDA Tools for FPGA Development –> 9 lectures • 13min.
  • Quartus Prime, by Intel –> 13 lectures • 35min.
  • EDA Playground, by Doulos –> 10 lectures • 30min.
  • Vivado Design Suite, by Xilinx –> 15 lectures • 42min.
  • LabsLand –> 10 lectures • 33min.
  • Wrap Up –> 5 lectures • 6min.

FPGA Embedded Design, Part 3 – EDA Tools

Requirements

  • This course is part of the FPGA Embedded Design series, by Closure Laboratories.
  • Basic knowledge of Hardware Description languages like Verilog or VHDL is expected. Consider taking our course FPGA Embedded Design, Part 1: Verilog.
  • Basic FPGA design. Consider taking our course FPGA Embedded Design, Part 2: Basic FPGA Training.

It’s time to learn more about FPGA IDEs!

In this third part of the FPGA Embedded Design series, we’ll get our hands on four different EDA Tools to bring our designs to life.

We’ll use four different development tools, and you may follow along with either of them. You may also use an FPGA development board to get the most out of your IDE. We recommend wither  the DE0-CV, with a Cyclone V FPGA from Altera/Intel, or the BASYS3, with an Artix7 FPGA from Xilinx.

This course consists of two main parts:

  1. EDA Tools overview, where we’ll cover what EDA Tools are, several examples of commercial and non-commercial tools available.
  2. Hands-On Training, where we’ll give you a walkthrough of each of the following tools: Quartus Prime (by Intel), EDA Playground (by Doulos), Vivado Design Suite (by Xilinx), and LabsLand (a remote Lab tool).

What are you waiting for? Let’s have some fun!!!

Get Tutorial