Make and fit an internal Door Frame

To fit a door frame may seem challenging, but I will walk you through it (pun intended)

I start by showing you how a door frame is put together with two simple joints, we then look at the location and go through the set up of the frame in place, I explain the practicalities of each of the frame parts and how to fix them. The frame has to receive a door which is accurately made and so our frame will be fitted and fixed to match this.

What you’ll learn

  • How to fit a door frame.
  • If fitting a new door frame would get you ‘lost at sea’, join me and we will sail through it.
  • This is for an interior door frame but as with most of my courses it’s adaptable, this can be applied to an exterior door frame too..
  • There is a bonus lecture at the end, giving you advice on this topic and, it can be applied all my other courses..

Course Content

  • Lecture 1 intro and making the door frame –> 1 lecture • 7min.
  • Frame prep –> 1 lecture • 5min.
  • Lecture 3 –> 1 lecture • 6min.
  • Lecture 4 –> 1 lecture • 3min.
  • Lecture 5 –> 1 lecture • 3min.
  • Bonus Lecture –> 1 lecture • 8min.

Make and fit an internal Door Frame

Requirements

  • Basic measuring required along with a few woodworking tools.

I start by showing you how a door frame is put together with two simple joints, we then look at the location and go through the set up of the frame in place, I explain the practicalities of each of the frame parts and how to fix them. The frame has to receive a door which is accurately made and so our frame will be fitted and fixed to match this.