7 Modules for Piping Codes & Standards

ASME Codes & Standards, API Standards, ASTM Standards, Pipe Wall Thickness, Impact Testing

Codes and standards have been developed by industry experts to standardize the work flows and designs. Majorly the Codes and standards are defined as following:

What you’ll learn

  • 7 Modules of Piping Codes & Standards.
  • 12 Major Differences between ASME B31.1 & ASME B31.3.
  • ASME Standards : ASME B36.10, ASME B16.5, ASME B16.47.
  • Piping Wall Thickness calculation criteria.
  • PT rating Philosophy.
  • Allowable stresses.
  • Impact Testing.
  • API standards : API 600, API 6D, API 598.
  • ASTM Standards : Carbon Steel, High Temperature steel, Low temperature steel, Alloy Steels.

Course Content

  • Introduction to Piping Codes & Standards –> 1 lecture • 7min.
  • 12 Major Difference B/W ASME B31.1 & ASME B 31.3 –> 1 lecture • 17min.
  • Piping ASME Standards –> 3 lectures • 22min.
  • Pipe Wall thickness Calculation Criteria –> 6 lectures • 1hr.
  • Impact Testing : ASME B 31.3 Clauses –> 1 lecture • 15min.
  • API standards : API 600, API 6D, API 598 Clauses –> 3 lectures • 1hr 30min.
  • ASTM Standards : Carbon Steel, High & Low Carbon Steel, Alloy Steel –> 1 lecture • 31min.

7 Modules for Piping Codes & Standards

Requirements

  • Designers & Engineers.
  • Piping Designers.

Codes and standards have been developed by industry experts to standardize the work flows and designs. Majorly the Codes and standards are defined as following:

Codes:

A group of rules or systematic procedures for design, fabrication, installation , examination & inspection; prepared in such a manner that it can be adopted by legal jurisdiction and made into law.

Standards:

Documents prepared by a recognized professional group or committee which contain mandatory requirements.

This course has been divided into following modules to understand the requirements in organized manner :

What you’ll learn

  • Introduction to Piping Codes & Standards
  • 12 Major Differences between ASME B31.1 & ASME B31.3
  • ASME Standards : ASME B36.10, ASME B16.5, ASME B16.47
  • Piping Wall Thickness calculation criteria
  • PT rating Philosophy
  • Allowable stresses
  • Impact Testing
  • API standards : API 600, API 6D, API 598
  • ASTM Standards : Carbon Steel, High Temperature steel, Low temperature steel, Alloy Steels

In First section we will have overview of standards and codes which are commonly used in chemical industries. The important clauses have been captured and explained in very simple ans systematic manner. 12 Major difference between two major codes of Process & Power piping have been captured and detailed. Commonly used standards of Pipe & flanges have been explained so that can be referred while execution phase of the project.

For Pipe wall thickness calculation section, PT rating, Allowable stresses have been discussed because calculating the action thickness calculations.

In Impact testing section, all the clasues required to get the exemptions have been listed out and explained in details.

Important clauses from API & ASTM standards have also been captured to refresh the basic fundamentals and can be implementing the actual design.