Advance steel from modeling to drawings.
In this Course you will learn how to use the Advance steel program perfectly.
What you’ll learn
- Grids Creation.
- Steel elements Modeling(Column, beam, polybeam,Double, Tapered…).
- Plates.
- Concrete Elements.
- Connections.
- Numbering.
- Drawings.
Course Content
- Introduction –> 6 lectures • 30min.
- Column and Beam Modeling –> 14 lectures • 56min.
- Plates –> 2 lectures • 6min.
- Extended Modeling –> 5 lectures • 40min.
- Connections –> 18 lectures • 2hr 12min.
- Numbering –> 7 lectures • 27min.
- Drawing –> 5 lectures • 30min.
- Bonus –> 1 lecture • 1min.
Requirements
- Advance Steel Program.
In this Course you will learn how to use the Advance steel program perfectly.
1-Grids creation and editing by many methods.
2-Elements Modeling (Column,beam,Welded, double sections, Folded beam, tapered , Aluminum Section and others)
3-plates Creation and editing.
4-Extended Elements (Portal frame, mono-pitch frame, bracing, purlins and Truss)
5-Connections (Anchor, holes, shear studs)
Base plate Connection, Frame knee connection, Apex haunch, Clip Angle, Gusset plate at one diagonal, Gusset plate in center, 4 diagonals connection, Purlin connection, purlin connection with plate, Two purlins with bolts, Vertical purlin plate,Double purlin splice plate
6-Numbering
7-GA and assembly Drawing.
8-Assembly list.
