Electric Vehicle Crash Course

EV Projects & Prototype Development

Hey!

What you’ll learn

  • How to calculate required Average Motor Power.
  • How to calculate Gear Ratio.
  • How to calculate Battery & Vehicle Range.
  • How to obtain Rated Vehicle Speed.
  • How to obtain torque developed by motor.
  • How to obtain motor efficiency.
  • How to obtain rated vehicle speed.
  • How to calculate cost of electricity bill for single charge.
  • How to calculate running cost of vehicle for per km travel.
  • How to calculate battery replacement cost for per km.
  • How to estimate charging time from C-rating of battery.
  • About different Motors, Controller, Battery, Throttle and other Mechanical aspects..
  • Starting Electric Vehicle Project and Building Prototype..
  • Connection of Motor, Controller and other Accessories..
  • Type of Electric Bicycle & PAS.
  • About Electric Vehicle Industries of India and Startups.
  • 5+ Practice Assignements.

Course Content

  • Introduction –> 1 lecture • 6min.
  • Basic System Parameters –> 2 lectures • 13min.
  • EV Calculations: –> 8 lectures • 1hr 24min.
  • PMDC Motor Kit –> 5 lectures • 37min.
  • BLDC Hub Motor Kit –> 2 lectures • 25min.
  • Types of Electric Bicycle –> 1 lecture • 11min.
  • Other Important Things need to Know –> 1 lecture • 6min.
  • Electric Vehicle Industries of India? ? ? –> 10 lectures • 51min.

Electric Vehicle Crash Course

Requirements

  • No prerequisite required for starting EV Project and Calculation as this course starts from basic electrical and mechanical parameters..

Hey!

I am Dr. Jignesh Makwana.

I am more curious about learning than teaching, yes that’s true, teaching for engineering, science or technology in this rapidly changing world demands learning, learning and better understanding before you teach.

I have experienced during the past several years that electrical vehicle projects are gaining much attention amongst students which is obvious for today’s world’s trend toward sustainable green transportation system.

Interaction with such enthusiastic students from various engineering branches, as well as other interested peoples made me realize that despite of numbers of books and resources available, students are facing problem for getting started for their Electric Vehicle Project.

So I decided to design such curriculum that fits in one bucket to suit all kind of EV enthusiastic students. If you got the point, you can guess that, this course does not include differential equations and dynamic modeling, but beside, it has much more to offer for from basic Electrical Vehicle Calculations, Demonstration & Practice. This course is a bundle to provide information, knowledge and practice.

This course was started with EV calculation section followed by the Electric bicycle project component and demonstration of different EV Motors & controllers. Now it turned in to community of most active EV enthusiastic students sharing their assignment and projects.

Course is not limited to these contents; many more things will be added in future that can be helpful for Electric Vehicle Project.

 

What this Course Includes?

This course is designed to help EV enthusiastic of all age to start Electric Vehicle Projects and Prototype Development.

Please check the course curriculum or watch “Introduction” session for more detail.

 

Practice Assignments:

At the end of EV Calculation Section, you will be excited to solve specially designed assignment for finding, EV motor rating, torque, range of vehicle and complete data sheet of your EV Project. It is not about only mathematical equations, but you will also learn about many fundamental concepts too.

 

How often I am available for queries:

My students know that I always try to reply their queries as soon as possible. I love to hear from my students, no matter how small or silly their query is. I spare sufficient time for my online-students everyday including Sunday. I also personally check all assignments in detail and make important notes whenever it requires.

 

Who this course is for:

  • Any Electric Vehicle Enthusiastic of all age
  • Anyone interested in starting Electric Vehicle Project
  • Engineering Students working on EV Projects

 

Know your Instructor:

He completed Phd in Electrical from Indian Institute of Technology Roorkee, known as IIT Roorkee, India, with specialization in special EV motor called SR Motor or SRM that recently used in Tesla’s new S3 model in replacement of Induction Motor.

Dr. Jignesh Makwana is working on Electric Vehicle and Motor Drive since 2006 and exploring ecosystem for Electric Vehicle and Charging Infrastructure. He published numbers research articles in international journals, technical books and chapters.

He served as Head of Department, Electrical Engineering, faculty of technology at Marwadi University, Rajkot from 2014 to 2017.

He completed many EV projects which includes EV conversion as well as purpose built EVs.

He is the one who designed and started very first Post Graduate program in Electric Vehicle in India at Marwadi University.

He is often invited for keynotes and conducting hands on workshop on electric vehicle and other topic.

He designed and Developed special EV Motor & Controller called SRM for Industries and also provides consultancy service.

Dr. Jignesh Makwana is founder and owner of RhyMak Electronics, which involved in manufacturing Electric Bicycles and accessories in India.

Dr. Jignesh Makwana joined hands with EV startups like Menza Motor, Evolet and many other motor manufacturing companies to share their expertise and help building ecosystem for Electric Vehicle in India.

He is a well known academician and expert in the field of curriculum design, art of paper setting, pedagogy design, content creation, evaluation & assessment practice and most importantly teaching.

This course is recognized by RhyMak Electronics & other EV industries

See what others have to say…..

⭐️⭐️⭐️⭐️⭐️

“Yes, it was a good match to what I was looking for. The concepts were quite clearly explained and I feel it is good for the starters as well as for people with some experience in the industry.”

– Saswat Kumar Sahu

⭐️⭐️⭐️⭐️⭐️

“Great understanding…..Thanks”

– Abhijit Walwadkar

⭐️⭐️⭐️⭐️⭐️

“Class understand easily”

– Alankar Honrao

 

⭐️⭐️⭐️⭐️

“Back to the basic, long time ago”

– John LeGuerrier

⭐️⭐️⭐️⭐️⭐️

“i loved this course.thanks you sir.but it would be better if you had shown the mounting procedure in short.”

– Nilashri P Sakhalkar

⭐️⭐️⭐️⭐️

“It was good to take this course. If it had more details about testing of motors, batteries and controllers too then it will be an excellent course for beginners.”

– V R Manoj Kumar

⭐️⭐️⭐️⭐️⭐️

“This is the best course I have ever come across. Thank you so much…”

– Dhaval Vora

⭐️⭐️⭐️⭐️⭐️

“Good course”

– Midhun Hari A

Get Tutorial